Hi Neal,

It sounds similar; I verified the location and the sql.ini
files as well. Nothing seems to be wrong there. I am not
sure if any other application is using the port 5000;
netstat -an does not show the port 5000 being utilized at
all.

Below is the output from the cmd prompt. It looks like the
network issue or resolving to the port issue.

Appreciate your help.

================================================== ==============
C:\Documents and Settings\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : sspibmlpt2831
Primary Dns Suffix . . . . . . . : HCLT.CORP.HCL.IN
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Intel(R)
PRO/Wireless 3945ABG Networ
k Connection
Physical Address. . . . . . . . . :
00-1B-77-71-BE-01

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Marvell Yukon
88E8055 PCI-E Gigabit
Ethernet Controller
Physical Address. . . . . . . . . :
00-A0-D1-7D-D3-65

C:\Documents and Settings\Administrator>

================================================== ============================================

C:\Documents and Settings\Administrator>hostname
sspibmlpt2831

================================================== ============================================

C:\Documents and Settings\Administrator>ping 127.0.0.1

Pinging 127.0.0.1 with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

================================================== ==============================================

C:\Documents and Settings\Administrator>telnet 127.0.0.1
5000
Connecting To 127.0.0.1...Could not open connection to the
host, on port 5000: C
onnect failed

================================================== ================================================

Thanks and regards,

Ravi

Hi Neal,

It sounds similar; I verified the location and the sql.ini
files as well. Nothing seems to be wrong there. I am not
sure if any other application is using the port 5000;
netstat -an does not show the port 5000 being utilized at
all.

Below is the output from the cmd prompt. It looks like the
network issue or resolving to the port issue.

Appreciate your help.

================================================== ==============
C:\Documents and Settings\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : sspibmlpt2831
Primary Dns Suffix . . . . . . . : HCLT.CORP.HCL.IN
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Intel(R)
PRO/Wireless 3945ABG Networ
k Connection
Physical Address. . . . . . . . . :
00-1B-77-71-BE-01

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Marvell Yukon
88E8055 PCI-E Gigabit
Ethernet Controller
Physical Address. . . . . . . . . :
00-A0-D1-7D-D3-65

C:\Documents and Settings\Administrator>

================================================== ============================================

C:\Documents and Settings\Administrator>hostname
sspibmlpt2831

================================================== ============================================

C:\Documents and Settings\Administrator>ping 127.0.0.1

Pinging 127.0.0.1 with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

================================================== ==============================================

C:\Documents and Settings\Administrator>telnet 127.0.0.1
5000
Connecting To 127.0.0.1...Could not open connection to the
host, on port 5000: C
onnect failed

================================================== ================================================

Thanks and regards,

Ravi

Hi Neal,

It sounds similar; I verified the location and the sql.ini
files as well. Nothing seems to be wrong there. I am not
sure if any other application is using the port 5000;
netstat -an does not show the port 5000 being utilized at
all.

Below is the output from the cmd prompt. It looks like the
network issue or resolving to the port issue.

Appreciate your help.

================================================== ==============
C:\Documents and Settings\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : sspibmlpt2831
Primary Dns Suffix . . . . . . . : HCLT.CORP.HCL.IN
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Intel(R)
PRO/Wireless 3945ABG Networ
k Connection
Physical Address. . . . . . . . . :
00-1B-77-71-BE-01

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Marvell Yukon
88E8055 PCI-E Gigabit
Ethernet Controller
Physical Address. . . . . . . . . :
00-A0-D1-7D-D3-65

C:\Documents and Settings\Administrator>

================================================== ============================================

C:\Documents and Settings\Administrator>hostname
sspibmlpt2831

================================================== ============================================

C:\Documents and Settings\Administrator>ping 127.0.0.1

Pinging 127.0.0.1 with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

================================================== ==============================================

C:\Documents and Settings\Administrator>telnet 127.0.0.1
5000
Connecting To 127.0.0.1...Could not open connection to the
host, on port 5000: C
onnect failed

================================================== ================================================

Thanks and regards,

Ravi

Hi Neal,

It sounds similar; I verified the location and the sql.ini
files as well. Nothing seems to be wrong there. I am not
sure if any other application is using the port 5000;
netstat -an does not show the port 5000 being utilized at
all.

Below is the output from the cmd prompt. It looks like the
network issue or resolving to the port issue.

Appreciate your help.

================================================== ==============
C:\Documents and Settings\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : sspibmlpt2831
Primary Dns Suffix . . . . . . . : HCLT.CORP.HCL.IN
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Intel(R)
PRO/Wireless 3945ABG Networ
k Connection
Physical Address. . . . . . . . . :
00-1B-77-71-BE-01

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Marvell Yukon
88E8055 PCI-E Gigabit
Ethernet Controller
Physical Address. . . . . . . . . :
00-A0-D1-7D-D3-65

C:\Documents and Settings\Administrator>

================================================== ============================================

C:\Documents and Settings\Administrator>hostname
sspibmlpt2831

================================================== ============================================

C:\Documents and Settings\Administrator>ping 127.0.0.1

Pinging 127.0.0.1 with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

================================================== ==============================================

C:\Documents and Settings\Administrator>telnet 127.0.0.1
5000
Connecting To 127.0.0.1...Could not open connection to the
host, on port 5000: C
onnect failed

================================================== ================================================

Thanks and regards,

Ravi

Hi Neal,

It sounds similar; I verified the location and the sql.ini
files as well. Nothing seems to be wrong there. I am not
sure if any other application is using the port 5000;
netstat -an does not show the port 5000 being utilized at
all.

Below is the output from the cmd prompt. It looks like the
network issue or resolving to the port issue.

Appreciate your help.

================================================== ==============
C:\Documents and Settings\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : sspibmlpt2831
Primary Dns Suffix . . . . . . . : HCLT.CORP.HCL.IN
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Intel(R)
PRO/Wireless 3945ABG Networ
k Connection
Physical Address. . . . . . . . . :
00-1B-77-71-BE-01

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Marvell Yukon
88E8055 PCI-E Gigabit
Ethernet Controller
Physical Address. . . . . . . . . :
00-A0-D1-7D-D3-65

C:\Documents and Settings\Administrator>

================================================== ============================================

C:\Documents and Settings\Administrator>hostname
sspibmlpt2831

================================================== ============================================

C:\Documents and Settings\Administrator>ping 127.0.0.1

Pinging 127.0.0.1 with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

================================================== ==============================================

C:\Documents and Settings\Administrator>telnet 127.0.0.1
5000
Connecting To 127.0.0.1...Could not open connection to the
host, on port 5000: C
onnect failed

================================================== ================================================

Thanks and regards,

Ravi

Hi Neal,

It sounds similar; I verified the location and the sql.ini
files as well. Nothing seems to be wrong there. I am not
sure if any other application is using the port 5000;
netstat -an does not show the port 5000 being utilized at
all.

Below is the output from the cmd prompt. It looks like the
network issue or resolving to the port issue.

Appreciate your help.

================================================== ==============
C:\Documents and Settings\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : sspibmlpt2831
Primary Dns Suffix . . . . . . . : HCLT.CORP.HCL.IN
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Intel(R)
PRO/Wireless 3945ABG Networ
k Connection
Physical Address. . . . . . . . . :
00-1B-77-71-BE-01

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Marvell Yukon
88E8055 PCI-E Gigabit
Ethernet Controller
Physical Address. . . . . . . . . :
00-A0-D1-7D-D3-65

C:\Documents and Settings\Administrator>

================================================== ============================================

C:\Documents and Settings\Administrator>hostname
sspibmlpt2831

================================================== ============================================

C:\Documents and Settings\Administrator>ping 127.0.0.1

Pinging 127.0.0.1 with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

================================================== ==============================================

C:\Documents and Settings\Administrator>telnet 127.0.0.1
5000
Connecting To 127.0.0.1...Could not open connection to the
host, on port 5000: C
onnect failed

================================================== ================================================

Thanks and regards,

Ravi

Hi Neal,

It sounds similar; I verified the location and the sql.ini
files as well. Nothing seems to be wrong there. I am not
sure if any other application is using the port 5000;
netstat -an does not show the port 5000 being utilized at
all.

Below is the output from the cmd prompt. It looks like the
network issue or resolving to the port issue.

Appreciate your help.

================================================== ==============
C:\Documents and Settings\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : sspibmlpt2831
Primary Dns Suffix . . . . . . . : HCLT.CORP.HCL.IN
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Intel(R)
PRO/Wireless 3945ABG Networ
k Connection
Physical Address. . . . . . . . . :
00-1B-77-71-BE-01

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Marvell Yukon
88E8055 PCI-E Gigabit
Ethernet Controller
Physical Address. . . . . . . . . :
00-A0-D1-7D-D3-65

C:\Documents and Settings\Administrator>

================================================== ============================================

C:\Documents and Settings\Administrator>hostname
sspibmlpt2831

================================================== ============================================

C:\Documents and Settings\Administrator>ping 127.0.0.1

Pinging 127.0.0.1 with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

================================================== ==============================================

C:\Documents and Settings\Administrator>telnet 127.0.0.1
5000
Connecting To 127.0.0.1...Could not open connection to the
host, on port 5000: C
onnect failed

================================================== ================================================

Thanks and regards,

Ravi

Hi Neal,

It sounds similar; I verified the location and the sql.ini
files as well. Nothing seems to be wrong there. I am not
sure if any other application is using the port 5000;
netstat -an does not show the port 5000 being utilized at
all.

Below is the output from the cmd prompt. It looks like the
network issue or resolving to the port issue.

Appreciate your help.

================================================== ==============
C:\Documents and Settings\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : sspibmlpt2831
Primary Dns Suffix . . . . . . . : HCLT.CORP.HCL.IN
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Intel(R)
PRO/Wireless 3945ABG Networ
k Connection
Physical Address. . . . . . . . . :
00-1B-77-71-BE-01

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Marvell Yukon
88E8055 PCI-E Gigabit
Ethernet Controller
Physical Address. . . . . . . . . :
00-A0-D1-7D-D3-65

C:\Documents and Settings\Administrator>

================================================== ============================================

C:\Documents and Settings\Administrator>hostname
sspibmlpt2831

================================================== ============================================

C:\Documents and Settings\Administrator>ping 127.0.0.1

Pinging 127.0.0.1 with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

================================================== ==============================================

C:\Documents and Settings\Administrator>telnet 127.0.0.1
5000
Connecting To 127.0.0.1...Could not open connection to the
host, on port 5000: C
onnect failed

================================================== ================================================

Thanks and regards,

Ravi

Hi Neal,

It sounds similar; I verified the location and the sql.ini
files as well. Nothing seems to be wrong there. I am not
sure if any other application is using the port 5000;
netstat -an does not show the port 5000 being utilized at
all.

Below is the output from the cmd prompt. It looks like the
network issue or resolving to the port issue.

Appreciate your help.

================================================== ==============
C:\Documents and Settings\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : sspibmlpt2831
Primary Dns Suffix . . . . . . . : HCLT.CORP.HCL.IN
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Intel(R)
PRO/Wireless 3945ABG Networ
k Connection
Physical Address. . . . . . . . . :
00-1B-77-71-BE-01

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Marvell Yukon
88E8055 PCI-E Gigabit
Ethernet Controller
Physical Address. . . . . . . . . :
00-A0-D1-7D-D3-65

C:\Documents and Settings\Administrator>

================================================== ============================================

C:\Documents and Settings\Administrator>hostname
sspibmlpt2831

================================================== ============================================

C:\Documents and Settings\Administrator>ping 127.0.0.1

Pinging 127.0.0.1 with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

================================================== ==============================================

C:\Documents and Settings\Administrator>telnet 127.0.0.1
5000
Connecting To 127.0.0.1...Could not open connection to the
host, on port 5000: C
onnect failed

================================================== ================================================

Thanks and regards,

Ravi

Hi Neal,

It sounds similar; I verified the location and the sql.ini
files as well. Nothing seems to be wrong there. I am not
sure if any other application is using the port 5000;
netstat -an does not show the port 5000 being utilized at
all.

Below is the output from the cmd prompt. It looks like the
network issue or resolving to the port issue.

Appreciate your help.

================================================== ==============
C:\Documents and Settings\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : sspibmlpt2831
Primary Dns Suffix . . . . . . . : HCLT.CORP.HCL.IN
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Intel(R)
PRO/Wireless 3945ABG Networ
k Connection
Physical Address. . . . . . . . . :
00-1B-77-71-BE-01

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media
disconnected
Description . . . . . . . . . . . : Marvell Yukon
88E8055 PCI-E Gigabit
Ethernet Controller
Physical Address. . . . . . . . . :
00-A0-D1-7D-D3-65

C:\Documents and Settings\Administrator>

================================================== ============================================

C:\Documents and Settings\Administrator>hostname
sspibmlpt2831

================================================== ============================================

C:\Documents and Settings\Administrator>ping 127.0.0.1

Pinging 127.0.0.1 with 32 bytes of data:

Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128

Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms

================================================== ==============================================

C:\Documents and Settings\Administrator>telnet 127.0.0.1
5000
Connecting To 127.0.0.1...Could not open connection to the
host, on port 5000: C
onnect failed

================================================== ================================================

Thanks and regards,

Ravi