Re: ASE 15.0.2 from PB 6.5

#1

You can use the Developer Edition license that ships with ASE. Edit the
file:
%SYBASE%\ASE-15_0\sysam\<servername>.properties

and change the lines with PE= and LT=. They should be
PE=DE
LT=DT

Save the file and you should be able to start ASE. As for the PB issues, you
might also want to post in the powerbuilder newsgroup.

Mark Kusma

"Pål Sigurd Bakkejord" <pal.s.bakkejord (AT) teroplan (DOT) no> wrote

Quote:

I have dowloaded ASE 1502 and installed on a VM Win2008 server. All Ok
BCP used to load a lot of tables. Ok
Open PB 9 from old client and connected to then new database: Nearly Ok .
We are locked to using an old application PB 6.5 for wich we dont have
sourcecode.
Problem: When connection to our old 11.5 sybase as the tableowner, we
dont hav to qualify tables with username,
but when using ASE 15.0.2 we have to!. I am not able to find any
parameter or setting to change this behaviour.
Q1: How to avoid qualifying tablenames with tableowner?
Q2: My grace period for the ASE 15.0.2 elapsed today. Is it possible to
prolong this some?

Mvh
Pål Sigurd Bakkejord

E-mail er scannet med Norton Antivirus

#2

You can use the Developer Edition license that ships with ASE. Edit the
file:
%SYBASE%\ASE-15_0\sysam\<servername>.properties

and change the lines with PE= and LT=. They should be
PE=DE
LT=DT

Save the file and you should be able to start ASE. As for the PB issues, you
might also want to post in the powerbuilder newsgroup.

Mark Kusma

"Pål Sigurd Bakkejord" <pal.s.bakkejord (AT) teroplan (DOT) no> wrote

Quote:

I have dowloaded ASE 1502 and installed on a VM Win2008 server. All Ok
BCP used to load a lot of tables. Ok
Open PB 9 from old client and connected to then new database: Nearly Ok .
We are locked to using an old application PB 6.5 for wich we dont have
sourcecode.
Problem: When connection to our old 11.5 sybase as the tableowner, we
dont hav to qualify tables with username,
but when using ASE 15.0.2 we have to!. I am not able to find any
parameter or setting to change this behaviour.
Q1: How to avoid qualifying tablenames with tableowner?
Q2: My grace period for the ASE 15.0.2 elapsed today. Is it possible to
prolong this some?

Mvh
Pål Sigurd Bakkejord

E-mail er scannet med Norton Antivirus

#3

You can use the Developer Edition license that ships with ASE. Edit the
file:
%SYBASE%\ASE-15_0\sysam\<servername>.properties

and change the lines with PE= and LT=. They should be
PE=DE
LT=DT

Save the file and you should be able to start ASE. As for the PB issues, you
might also want to post in the powerbuilder newsgroup.

Mark Kusma

"Pål Sigurd Bakkejord" <pal.s.bakkejord (AT) teroplan (DOT) no> wrote

Quote:

I have dowloaded ASE 1502 and installed on a VM Win2008 server. All Ok
BCP used to load a lot of tables. Ok
Open PB 9 from old client and connected to then new database: Nearly Ok .
We are locked to using an old application PB 6.5 for wich we dont have
sourcecode.
Problem: When connection to our old 11.5 sybase as the tableowner, we
dont hav to qualify tables with username,
but when using ASE 15.0.2 we have to!. I am not able to find any
parameter or setting to change this behaviour.
Q1: How to avoid qualifying tablenames with tableowner?
Q2: My grace period for the ASE 15.0.2 elapsed today. Is it possible to
prolong this some?

Mvh
Pål Sigurd Bakkejord

E-mail er scannet med Norton Antivirus

#4

You can use the Developer Edition license that ships with ASE. Edit the
file:
%SYBASE%\ASE-15_0\sysam\<servername>.properties

and change the lines with PE= and LT=. They should be
PE=DE
LT=DT

Save the file and you should be able to start ASE. As for the PB issues, you
might also want to post in the powerbuilder newsgroup.

Mark Kusma

"Pål Sigurd Bakkejord" <pal.s.bakkejord (AT) teroplan (DOT) no> wrote

Quote:

I have dowloaded ASE 1502 and installed on a VM Win2008 server. All Ok
BCP used to load a lot of tables. Ok
Open PB 9 from old client and connected to then new database: Nearly Ok .
We are locked to using an old application PB 6.5 for wich we dont have
sourcecode.
Problem: When connection to our old 11.5 sybase as the tableowner, we
dont hav to qualify tables with username,
but when using ASE 15.0.2 we have to!. I am not able to find any
parameter or setting to change this behaviour.
Q1: How to avoid qualifying tablenames with tableowner?
Q2: My grace period for the ASE 15.0.2 elapsed today. Is it possible to
prolong this some?

Mvh
Pål Sigurd Bakkejord

E-mail er scannet med Norton Antivirus

#5

You can use the Developer Edition license that ships with ASE. Edit the
file:
%SYBASE%\ASE-15_0\sysam\<servername>.properties

and change the lines with PE= and LT=. They should be
PE=DE
LT=DT

Save the file and you should be able to start ASE. As for the PB issues, you
might also want to post in the powerbuilder newsgroup.

Mark Kusma

"Pål Sigurd Bakkejord" <pal.s.bakkejord (AT) teroplan (DOT) no> wrote

Quote:

I have dowloaded ASE 1502 and installed on a VM Win2008 server. All Ok
BCP used to load a lot of tables. Ok
Open PB 9 from old client and connected to then new database: Nearly Ok .
We are locked to using an old application PB 6.5 for wich we dont have
sourcecode.
Problem: When connection to our old 11.5 sybase as the tableowner, we
dont hav to qualify tables with username,
but when using ASE 15.0.2 we have to!. I am not able to find any
parameter or setting to change this behaviour.
Q1: How to avoid qualifying tablenames with tableowner?
Q2: My grace period for the ASE 15.0.2 elapsed today. Is it possible to
prolong this some?

Mvh
Pål Sigurd Bakkejord

E-mail er scannet med Norton Antivirus

#6

You can use the Developer Edition license that ships with ASE. Edit the
file:
%SYBASE%\ASE-15_0\sysam\<servername>.properties

and change the lines with PE= and LT=. They should be
PE=DE
LT=DT

Save the file and you should be able to start ASE. As for the PB issues, you
might also want to post in the powerbuilder newsgroup.

Mark Kusma

"Pål Sigurd Bakkejord" <pal.s.bakkejord (AT) teroplan (DOT) no> wrote

Quote:

I have dowloaded ASE 1502 and installed on a VM Win2008 server. All Ok
BCP used to load a lot of tables. Ok
Open PB 9 from old client and connected to then new database: Nearly Ok .
We are locked to using an old application PB 6.5 for wich we dont have
sourcecode.
Problem: When connection to our old 11.5 sybase as the tableowner, we
dont hav to qualify tables with username,
but when using ASE 15.0.2 we have to!. I am not able to find any
parameter or setting to change this behaviour.
Q1: How to avoid qualifying tablenames with tableowner?
Q2: My grace period for the ASE 15.0.2 elapsed today. Is it possible to
prolong this some?

Mvh
Pål Sigurd Bakkejord

E-mail er scannet med Norton Antivirus

#7

You can use the Developer Edition license that ships with ASE. Edit the
file:
%SYBASE%\ASE-15_0\sysam\<servername>.properties

and change the lines with PE= and LT=. They should be
PE=DE
LT=DT

Save the file and you should be able to start ASE. As for the PB issues, you
might also want to post in the powerbuilder newsgroup.

Mark Kusma

"Pål Sigurd Bakkejord" <pal.s.bakkejord (AT) teroplan (DOT) no> wrote

Quote:

I have dowloaded ASE 1502 and installed on a VM Win2008 server. All Ok
BCP used to load a lot of tables. Ok
Open PB 9 from old client and connected to then new database: Nearly Ok .
We are locked to using an old application PB 6.5 for wich we dont have
sourcecode.
Problem: When connection to our old 11.5 sybase as the tableowner, we
dont hav to qualify tables with username,
but when using ASE 15.0.2 we have to!. I am not able to find any
parameter or setting to change this behaviour.
Q1: How to avoid qualifying tablenames with tableowner?
Q2: My grace period for the ASE 15.0.2 elapsed today. Is it possible to
prolong this some?

Mvh
Pål Sigurd Bakkejord

E-mail er scannet med Norton Antivirus

#8

You can use the Developer Edition license that ships with ASE. Edit the
file:
%SYBASE%\ASE-15_0\sysam\<servername>.properties

and change the lines with PE= and LT=. They should be
PE=DE
LT=DT

Save the file and you should be able to start ASE. As for the PB issues, you
might also want to post in the powerbuilder newsgroup.

Mark Kusma

"Pål Sigurd Bakkejord" <pal.s.bakkejord (AT) teroplan (DOT) no> wrote

Quote:

I have dowloaded ASE 1502 and installed on a VM Win2008 server. All Ok
BCP used to load a lot of tables. Ok
Open PB 9 from old client and connected to then new database: Nearly Ok .
We are locked to using an old application PB 6.5 for wich we dont have
sourcecode.
Problem: When connection to our old 11.5 sybase as the tableowner, we
dont hav to qualify tables with username,
but when using ASE 15.0.2 we have to!. I am not able to find any
parameter or setting to change this behaviour.
Q1: How to avoid qualifying tablenames with tableowner?
Q2: My grace period for the ASE 15.0.2 elapsed today. Is it possible to
prolong this some?

Mvh
Pål Sigurd Bakkejord

E-mail er scannet med Norton Antivirus

#9

You can use the Developer Edition license that ships with ASE. Edit the
file:
%SYBASE%\ASE-15_0\sysam\<servername>.properties

and change the lines with PE= and LT=. They should be
PE=DE
LT=DT

Save the file and you should be able to start ASE. As for the PB issues, you
might also want to post in the powerbuilder newsgroup.

Mark Kusma

"Pål Sigurd Bakkejord" <pal.s.bakkejord (AT) teroplan (DOT) no> wrote

Quote:

I have dowloaded ASE 1502 and installed on a VM Win2008 server. All Ok
BCP used to load a lot of tables. Ok
Open PB 9 from old client and connected to then new database: Nearly Ok .
We are locked to using an old application PB 6.5 for wich we dont have
sourcecode.
Problem: When connection to our old 11.5 sybase as the tableowner, we
dont hav to qualify tables with username,
but when using ASE 15.0.2 we have to!. I am not able to find any
parameter or setting to change this behaviour.
Q1: How to avoid qualifying tablenames with tableowner?
Q2: My grace period for the ASE 15.0.2 elapsed today. Is it possible to
prolong this some?

Mvh
Pål Sigurd Bakkejord

E-mail er scannet med Norton Antivirus

#10

You can use the Developer Edition license that ships with ASE. Edit the
file:
%SYBASE%\ASE-15_0\sysam\<servername>.properties

and change the lines with PE= and LT=. They should be
PE=DE
LT=DT

Save the file and you should be able to start ASE. As for the PB issues, you
might also want to post in the powerbuilder newsgroup.

Mark Kusma

"Pål Sigurd Bakkejord" <pal.s.bakkejord (AT) teroplan (DOT) no> wrote

Quote:

I have dowloaded ASE 1502 and installed on a VM Win2008 server. All Ok
BCP used to load a lot of tables. Ok
Open PB 9 from old client and connected to then new database: Nearly Ok .
We are locked to using an old application PB 6.5 for wich we dont have
sourcecode.
Problem: When connection to our old 11.5 sybase as the tableowner, we
dont hav to qualify tables with username,
but when using ASE 15.0.2 we have to!. I am not able to find any
parameter or setting to change this behaviour.
Q1: How to avoid qualifying tablenames with tableowner?
Q2: My grace period for the ASE 15.0.2 elapsed today. Is it possible to
prolong this some?

Mvh
Pål Sigurd Bakkejord

E-mail er scannet med Norton Antivirus