"On the Cluster Network Selection page, specify the network resources for
your failover cluster instance:

* SQL Server Failover Cluster Network Name — This is the name used to
identify your failover cluster instance on the network.
* Network Settings — Specify the IP type and IP address for your
failover cluster instance.

To continue, click Next."

I've read those notes from microsoft sql 2008 clustering site BUT i dont
understand which IP need i to enter. Am i supposed to enter Public IP range
or Hearbeat IP range??

Currently my IP setting for this 2 nodes are :
node1:Public=10.1.103.123, Hearbeat=192.168.12.73
node2:Public=10.1.103.124, Hearbeat=192.168.12.74
MSDTC=10.1.103.41
Cluster Resources=10.1.103.40

I stuck at below wizard with this given value :
IP Type:IPv4
DHCP=check
Address=null
Subnet Mask=null
Network=Cluster Network 1

In my Failover Cluster Management interface, Cluster Network 1 is referring
to Public IP. Does that mean that i need to configure my Network
Configuration Wizard with static IP with Public IP range or ELSE?

It looks like you don't have static IP addresses on the physical NICs, thus
they are inheriting the DHCP ON property. DHCP is supported in WIndows 2008
clustering, but you still can supply static IP addresses if you desire. If
you want to use static IP addresses, set the Physical NICs first, then the
cluster wizard should show you options for static IP addresses.

--
Geoff N. Hiten
Principal SQL Infrastructure Consultant
Microsoft SQL Server MVP





"Amirullail" <Amirullail (AT) discussions (DOT) microsoft.com> wrote

It looks like you don't have static IP addresses on the physical NICs, thus
they are inheriting the DHCP ON property. DHCP is supported in WIndows 2008
clustering, but you still can supply static IP addresses if you desire. If
you want to use static IP addresses, set the Physical NICs first, then the
cluster wizard should show you options for static IP addresses.

--
Geoff N. Hiten
Principal SQL Infrastructure Consultant
Microsoft SQL Server MVP





"Amirullail" <Amirullail (AT) discussions (DOT) microsoft.com> wrote

It looks like you don't have static IP addresses on the physical NICs, thus
they are inheriting the DHCP ON property. DHCP is supported in WIndows 2008
clustering, but you still can supply static IP addresses if you desire. If
you want to use static IP addresses, set the Physical NICs first, then the
cluster wizard should show you options for static IP addresses.

--
Geoff N. Hiten
Principal SQL Infrastructure Consultant
Microsoft SQL Server MVP





"Amirullail" <Amirullail (AT) discussions (DOT) microsoft.com> wrote

It looks like you don't have static IP addresses on the physical NICs, thus
they are inheriting the DHCP ON property. DHCP is supported in WIndows 2008
clustering, but you still can supply static IP addresses if you desire. If
you want to use static IP addresses, set the Physical NICs first, then the
cluster wizard should show you options for static IP addresses.

--
Geoff N. Hiten
Principal SQL Infrastructure Consultant
Microsoft SQL Server MVP





"Amirullail" <Amirullail (AT) discussions (DOT) microsoft.com> wrote

It looks like you don't have static IP addresses on the physical NICs, thus
they are inheriting the DHCP ON property. DHCP is supported in WIndows 2008
clustering, but you still can supply static IP addresses if you desire. If
you want to use static IP addresses, set the Physical NICs first, then the
cluster wizard should show you options for static IP addresses.

--
Geoff N. Hiten
Principal SQL Infrastructure Consultant
Microsoft SQL Server MVP





"Amirullail" <Amirullail (AT) discussions (DOT) microsoft.com> wrote

It looks like you don't have static IP addresses on the physical NICs, thus
they are inheriting the DHCP ON property. DHCP is supported in WIndows 2008
clustering, but you still can supply static IP addresses if you desire. If
you want to use static IP addresses, set the Physical NICs first, then the
cluster wizard should show you options for static IP addresses.

--
Geoff N. Hiten
Principal SQL Infrastructure Consultant
Microsoft SQL Server MVP





"Amirullail" <Amirullail (AT) discussions (DOT) microsoft.com> wrote

It looks like you don't have static IP addresses on the physical NICs, thus
they are inheriting the DHCP ON property. DHCP is supported in WIndows 2008
clustering, but you still can supply static IP addresses if you desire. If
you want to use static IP addresses, set the Physical NICs first, then the
cluster wizard should show you options for static IP addresses.

--
Geoff N. Hiten
Principal SQL Infrastructure Consultant
Microsoft SQL Server MVP





"Amirullail" <Amirullail (AT) discussions (DOT) microsoft.com> wrote

It looks like you don't have static IP addresses on the physical NICs, thus
they are inheriting the DHCP ON property. DHCP is supported in WIndows 2008
clustering, but you still can supply static IP addresses if you desire. If
you want to use static IP addresses, set the Physical NICs first, then the
cluster wizard should show you options for static IP addresses.

--
Geoff N. Hiten
Principal SQL Infrastructure Consultant
Microsoft SQL Server MVP





"Amirullail" <Amirullail (AT) discussions (DOT) microsoft.com> wrote

It looks like you don't have static IP addresses on the physical NICs, thus
they are inheriting the DHCP ON property. DHCP is supported in WIndows 2008
clustering, but you still can supply static IP addresses if you desire. If
you want to use static IP addresses, set the Physical NICs first, then the
cluster wizard should show you options for static IP addresses.

--
Geoff N. Hiten
Principal SQL Infrastructure Consultant
Microsoft SQL Server MVP





"Amirullail" <Amirullail (AT) discussions (DOT) microsoft.com> wrote