I have setup Active/Passive in the past with no problems
With Active/Active/Passive are all nodes on the same heartbeat?
Is the correct Private IP configuration correct?

Node1 10.0.0.1
Node2 10.0.0.2
Node3 10.0.0.3

If I go with this setup do both active nodes point at the passive mode as a
failover?
Does Active Node1 and Active node2 need to know about one another?

Any tips helpful

Thanks,
Dave

All nodes must share the heartbeat network, so yes, the IP's are correct.

Any node can host a service, so it doesn't matter which is not running a
service. They all know about each other.

--
Tom

----------------------------------------------------
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA, MCITP, MCTS
SQL Server MVP
Toronto, ON Canada
https://mvp.support.microsoft.com/profile/Tom.Moreau


"Duparoni" <Duparoni (AT) discussions (DOT) microsoft.com> wrote

I have setup Active/Passive in the past with no problems
With Active/Active/Passive are all nodes on the same heartbeat?
Is the correct Private IP configuration correct?

Node1 10.0.0.1
Node2 10.0.0.2
Node3 10.0.0.3

If I go with this setup do both active nodes point at the passive mode as a
failover?
Does Active Node1 and Active node2 need to know about one another?

Any tips helpful

Thanks,
Dave

All nodes must share the heartbeat network, so yes, the IP's are correct.

Any node can host a service, so it doesn't matter which is not running a
service. They all know about each other.

--
Tom

----------------------------------------------------
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA, MCITP, MCTS
SQL Server MVP
Toronto, ON Canada
https://mvp.support.microsoft.com/profile/Tom.Moreau


"Duparoni" <Duparoni (AT) discussions (DOT) microsoft.com> wrote

I have setup Active/Passive in the past with no problems
With Active/Active/Passive are all nodes on the same heartbeat?
Is the correct Private IP configuration correct?

Node1 10.0.0.1
Node2 10.0.0.2
Node3 10.0.0.3

If I go with this setup do both active nodes point at the passive mode as a
failover?
Does Active Node1 and Active node2 need to know about one another?

Any tips helpful

Thanks,
Dave

All nodes must share the heartbeat network, so yes, the IP's are correct.

Any node can host a service, so it doesn't matter which is not running a
service. They all know about each other.

--
Tom

----------------------------------------------------
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA, MCITP, MCTS
SQL Server MVP
Toronto, ON Canada
https://mvp.support.microsoft.com/profile/Tom.Moreau


"Duparoni" <Duparoni (AT) discussions (DOT) microsoft.com> wrote

I have setup Active/Passive in the past with no problems
With Active/Active/Passive are all nodes on the same heartbeat?
Is the correct Private IP configuration correct?

Node1 10.0.0.1
Node2 10.0.0.2
Node3 10.0.0.3

If I go with this setup do both active nodes point at the passive mode as a
failover?
Does Active Node1 and Active node2 need to know about one another?

Any tips helpful

Thanks,
Dave

All nodes must share the heartbeat network, so yes, the IP's are correct.

Any node can host a service, so it doesn't matter which is not running a
service. They all know about each other.

--
Tom

----------------------------------------------------
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA, MCITP, MCTS
SQL Server MVP
Toronto, ON Canada
https://mvp.support.microsoft.com/profile/Tom.Moreau


"Duparoni" <Duparoni (AT) discussions (DOT) microsoft.com> wrote

I have setup Active/Passive in the past with no problems
With Active/Active/Passive are all nodes on the same heartbeat?
Is the correct Private IP configuration correct?

Node1 10.0.0.1
Node2 10.0.0.2
Node3 10.0.0.3

If I go with this setup do both active nodes point at the passive mode as a
failover?
Does Active Node1 and Active node2 need to know about one another?

Any tips helpful

Thanks,
Dave

All nodes must share the heartbeat network, so yes, the IP's are correct.

Any node can host a service, so it doesn't matter which is not running a
service. They all know about each other.

--
Tom

----------------------------------------------------
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA, MCITP, MCTS
SQL Server MVP
Toronto, ON Canada
https://mvp.support.microsoft.com/profile/Tom.Moreau


"Duparoni" <Duparoni (AT) discussions (DOT) microsoft.com> wrote

I have setup Active/Passive in the past with no problems
With Active/Active/Passive are all nodes on the same heartbeat?
Is the correct Private IP configuration correct?

Node1 10.0.0.1
Node2 10.0.0.2
Node3 10.0.0.3

If I go with this setup do both active nodes point at the passive mode as a
failover?
Does Active Node1 and Active node2 need to know about one another?

Any tips helpful

Thanks,
Dave

All nodes must share the heartbeat network, so yes, the IP's are correct.

Any node can host a service, so it doesn't matter which is not running a
service. They all know about each other.

--
Tom

----------------------------------------------------
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA, MCITP, MCTS
SQL Server MVP
Toronto, ON Canada
https://mvp.support.microsoft.com/profile/Tom.Moreau


"Duparoni" <Duparoni (AT) discussions (DOT) microsoft.com> wrote

I have setup Active/Passive in the past with no problems
With Active/Active/Passive are all nodes on the same heartbeat?
Is the correct Private IP configuration correct?

Node1 10.0.0.1
Node2 10.0.0.2
Node3 10.0.0.3

If I go with this setup do both active nodes point at the passive mode as a
failover?
Does Active Node1 and Active node2 need to know about one another?

Any tips helpful

Thanks,
Dave

All nodes must share the heartbeat network, so yes, the IP's are correct.

Any node can host a service, so it doesn't matter which is not running a
service. They all know about each other.

--
Tom

----------------------------------------------------
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA, MCITP, MCTS
SQL Server MVP
Toronto, ON Canada
https://mvp.support.microsoft.com/profile/Tom.Moreau


"Duparoni" <Duparoni (AT) discussions (DOT) microsoft.com> wrote

I have setup Active/Passive in the past with no problems
With Active/Active/Passive are all nodes on the same heartbeat?
Is the correct Private IP configuration correct?

Node1 10.0.0.1
Node2 10.0.0.2
Node3 10.0.0.3

If I go with this setup do both active nodes point at the passive mode as a
failover?
Does Active Node1 and Active node2 need to know about one another?

Any tips helpful

Thanks,
Dave

All nodes must share the heartbeat network, so yes, the IP's are correct.

Any node can host a service, so it doesn't matter which is not running a
service. They all know about each other.

--
Tom

----------------------------------------------------
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA, MCITP, MCTS
SQL Server MVP
Toronto, ON Canada
https://mvp.support.microsoft.com/profile/Tom.Moreau


"Duparoni" <Duparoni (AT) discussions (DOT) microsoft.com> wrote

I have setup Active/Passive in the past with no problems
With Active/Active/Passive are all nodes on the same heartbeat?
Is the correct Private IP configuration correct?

Node1 10.0.0.1
Node2 10.0.0.2
Node3 10.0.0.3

If I go with this setup do both active nodes point at the passive mode as a
failover?
Does Active Node1 and Active node2 need to know about one another?

Any tips helpful

Thanks,
Dave

All nodes must share the heartbeat network, so yes, the IP's are correct.

Any node can host a service, so it doesn't matter which is not running a
service. They all know about each other.

--
Tom

----------------------------------------------------
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA, MCITP, MCTS
SQL Server MVP
Toronto, ON Canada
https://mvp.support.microsoft.com/profile/Tom.Moreau


"Duparoni" <Duparoni (AT) discussions (DOT) microsoft.com> wrote

I have setup Active/Passive in the past with no problems
With Active/Active/Passive are all nodes on the same heartbeat?
Is the correct Private IP configuration correct?

Node1 10.0.0.1
Node2 10.0.0.2
Node3 10.0.0.3

If I go with this setup do both active nodes point at the passive mode as a
failover?
Does Active Node1 and Active node2 need to know about one another?

Any tips helpful

Thanks,
Dave